None Y96591 Bedienerhandbuch Seite 5

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 5
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 4
4
®
SUBMERSIBLE
PUMP
YuanHua
Warning
To reduce the risk of electric shock,use only on
portable self-contained fountains no larger than
5 feet in any dimension.
Exception:If the fountain pump use a SO or ST
flexible cord.The warning above will not be
suitable any more.
-
The manipulation and utilization of our pump are
very simple and convenient. The user just needs
to pour a suitable height level of water and link t-
he pump with the outlet water pipe and then con
nect the pump with power supply in accordance
with the mark on the label.Thus the pump can run
well.
SAFETY INSTRUCTIONS
,
(+)Maximum
(-)Minimum
MIN
MAX
-+
Minimum Water Level
Flow control valve
MAX
MIN
TO clean the pump
Unplug the pump from electrical outlet.Use a
small soft brush or place it under water stream
to remove debris .
To keep water clean
Periodically change water to prevent water from
becoming sticky and forming microorganisms .
TROUBLESHOOTING
If the pump fails to run, the following
should be checked,
Check the circuit breaker,or try a different outl -
et to make sure that the pump is getting electric -
al power . NOTE-Always disconnect the pump f -
rom electrical outlet before checking.
Check the pump discharge and tubing for kinks
and obstructions.
Algae buildup can be flushed out with a gar-
den hose.
Remove the pump front cover & plate to acc -
ess the impeller area. Turn the rotor to ensure it
is not broken or jammed.
With little flow rate ,the pump will spew or
"burp"
Check the water level to make sure the pump
is completely submerged.
If abnormal noise is heard during operation
(with water),
First disconnect the power supply and then r -
emove pump front cover & plate.
Use hand to grip the impeller, gently pull the
impeller/rotor assembly out of the pump housing.
Rinse the impeller/rotor assembly and the
cavity with clean water . If breakage or surface
damage is found on the assembly, contact your
distributor for part replacement .
To reduce risk of electric shock
Always unplug the pump from the electric outl-
et before cleaning and handling.
Use with clean water only. Do not place it in o-
ther liquid. Never let the pump run dry.
OPTION-The pump is supplied with grounding
conductor and a grounding type attachment plug
and must be connected only to a proper ground
outlet to reduce the risk of electric shock.
Do not use the pump in water above 86 F or3 0° C.
Prevent the water from running into the electr -
ical outlet down the cord.
Do not lift ,carry , or pull the pump by the power
cord.
Do not replace the pump cord .Stop using the
pump if it sustains damage.
Seitenansicht 4
1 2 3 4 5

Kommentare zu diesen Handbüchern

Keine Kommentare