None BGLR20BF Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein None BGLR20BF herunter. none BGLR20BF Installation Guide Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
NOTE: Bell & Gossett recommends Bronze or Stainless Steel
Booster Pumps be used for pumping potable water.
This pump is for indoor use only.
SAFETY
INSTRUCTIONS
This safety alert symbol will be used in this manual and on the
pump Safety Instruction decal to draw attention to safety related
instructions. When used, the safety alert symbol means
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
FAILURE TO FOLLOW THE INSTRUCTIONS MAY RESULT IN A
SAFETY HAZARD.
Your Series LR
TM
Circulator should have the warning/caution
label and nonsubmersible warning label displayed to the right
(Fig. 1) on the pump conduit box. If this warning and caution
label is missing or illegible, contact your local B&G Represen-
tative for a replacement.
INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.
Series LR
TM
Circulators
Installation, Operation & Service Instructions
U
L
®
C US
LISTED
Bell & Gossett
Instruction Manual P86101
REVISION C
WARNING
BEFORE INSTALLING, USING
OR SERVICING THIS PRO-
DUCT, READ THE INSTRUC-
TIONS. TO REDUCE RISK
OF ELECTRICAL SHOCK
SEE INSTRUCTIONS FOR
PROPER INSTALLATION.
CAUTION
FOR SUPPLY CONNECTIONS
USE WIRE SUITABLE FOR AT
LEAST 90°C. USE COPPER
CONDUCTORS ONLY.
EMPLOYER DES FILS
D
ALIMENTATION ADEQUATS
POUR 90°C. FOR INDOOR USE
ONLY. EMPLOYER UNIQUE-
MENT A LINTERIEUR.
FIG. 1
WARNING
RISK OF ELECTRIC SHOCK;
THIS PUMP HAS NOT
BEEN INVESTIGATED FOR
USE IN SWIMMING POOL
AND MARINE AREAS.
-NONSUBMERSIBLE PUMP-
P86313
Seitenansicht 0
1 2 3 4

Inhaltsverzeichnis

Seite 1 - Circulators

NOTE: Bell & Gossett recommends Bronze or Stainless SteelBooster Pumps be used for pumping potable water.This pump is for indoor use only.SAFETYIN

Seite 2 - SAFETY REQUIREMENTS

WARNING: HOT WATER HAZARDBefore draining the system, allow water to cool to atleast 100°F, open the drain valve (take precautions againstwater damage)

Seite 3 - MODE OF DISCHARGE

PUMP INSTALLATIONLocate the pump so there is sufficient room for inspection,maintenance and service. Bell & Gossett recommends theinstallation of

Seite 4 - WIRING INSTRUCTIONS

LINELEADSGREENGROUNDSCREWALTERNATEGROUND SCREWFIG. 4CONDUIT BOX WIRING DETAIL1L7NSYSTEM PREPARATIONPrior to pump start-up, closed heating and cooling

Kommentare zu diesen Handbüchern

Keine Kommentare