None 8239205853 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein None 8239205853 herunter. none 8239205853 Installation Guide Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
12
Assembly - Attaching the Light Kit
Installing the light bulbs
13
Remove the bottom cover and nial from the threaded nipple
of the light kit tter assembly (H).
With power off, install the three incandescent bulbs (Max.
60W, included) (J) by screwing them into the light bulb
sockets.
Position the glass bowl (I) over the threaded nipple.
Re-install the bottom cover to the threaded nipple to secure
the glass bowl (I) properly.
Re-install and tighten the nial.
WARNING: Do not overtighten when installing the glass shade
into the light kit assembly. Allow the glass shade to cool
completely before removing.
E
H
I
J
WARNING: Over lamping the fan will result in the fan lights
shutting down until the proper wattage of bulbs are installed.
Reset the lights by turning off lights, replacing the bulbs with the
correct wattage bulbs, and turning the lights back on.
Assembling the fan without a light
kit
14
Remove the three light kit mounting screws (FF) on the
switch cup adaptor (G).
In order to use the fan without the light kit, remove the switch
cup (NN) from the top of the light kit tter assembly (H) by
removing the center hex nut inside the switch cup (NN), and
then thread the switch cup (NN) off of the threaded nipple on
the top of the light kit tter assembly (H).
Press the plastic plug (CC) into the center hole of the switch
cup (NN).
Position the switch cup (NN) on to the switch cup adaptor (G).
E
FF
NN
CC
G
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Installing the light bulbs

12Assembly - Attaching the Light KitInstalling the light bulbs13 □ Remove the bottom cover and nial from the threaded nipple of the light kit tter a

Seite 2 - Cómo instalar las bombillas

12Ensamblaje - Cómo instalar el kit de lucesCómo instalar las bombillas14 □ Retira la cubierta inferior y el remate de la boquilla roscada del ensambl

Kommentare zu diesen Handbüchern

Keine Kommentare